Close contact for you and comfort for your horse! This close contact saddle achieves an incredible fit for both the rider and horse during the jump, by using many innovations which benefit the horse:

• Panels fully in contact with the horse's back to avoid pressure points
(less pressure on the transverse spinal process)
• Three-point girthing system ensuring the saddle's stability and proper fit to distribute pressure over a larger surface

For the rider, only one layer of leather under the skirt (lower cut of the saddle flap around the stirrup bars) and comfort for the rider's abductors (wide pommel).

Benefits:

Allows the rider to have more precise actions
Wide pommel supports the rider's abductors
Comfort for the horse
3-point girthing system
Billet guards to prevent the saddle flap from wearing out

Data sheet

SE03

The circular economy is at the heart of CWD’s overall environmental approach. In accordance with the law, CWD will recover your old products upon your request. This request must be made within one month of the order’s delivery, limited to the products and quantities purchased.

How do I organize the recovery of my used products? Please get in touch with our customer service. We will send you a prepaid delivery label to return your old equipment to us at no additional cost.

CARE INSTRUCTIONS

- FIRST USING -

Using my saddle for the first time

In order to protect the leather, it is essential to initially oil your saddle. At CWD, we carry out this process before delivering your made-to-measure saddle. No additional treatment is needed, and you can use it as soon as you receive it.

Beware of the risk of staining white clothes, especially during the first few uses.

Using my accessories for the first time

Our accessories are delivered without having been oiled. Apply a large quantity of CWD oil or conditioner evenly and repeat if necessary to obtain the desired suppleness. Use the CWD glove to massage any excess conditioner into the leather. If possible, let the leather absorb the CWD conditioner for 24 hours in a well-ventilated room. Natural leathers will darken before lightening slightly to reach their definitive shade.span>

Before oiling or greasing your accessories, make sure to try them on your horse first. Accessories which have been greased cannot be returned.

- LEATHER CARE GUIDE -

How to care for your CWD Leather?

STEP 1 : CARE

Care for your equipment regularly with a damp sponge and glycerine soap to retain a soft, solid leather.

Saddles & tack : Clean all your equipment every day.

I shop the soap

STEP 2 : NOURISH

Oil with our balm, using the CWD glove. Adjust how often you do this depending on the seasons and poor weather. (c.f. expert advice).

Saddles : Start with the underside of the pads (excluding the billet straps), then the top side and finish with the seat. Renew once or twice a year.

Tack : Oil it once or twice a year. Adjust according to the products: for boots and girths, direct contact with water or sand may mean more regular oiling is required.

N.B.: All our saddles are oiled before they leave the workshop. Do not oil them before the first use. For tack, remember to try it before oiling it.

I shop the balm

Our expert advices.

In summer, after each use, the leather needs to be treated to compensate for and repair the drying out caused by the sun and high temperatures.

In winter, a heated area is needed to combat the ambient humidity, which is damaging to its lifespan and can be a source of mould.

Avoid the following. As far as possible, avoid cleaning your leathers with products which contain solvents which will prematurely discolour the saddle and will dry out the leather fibres.

Tip. If your saddle has been in contact with water, dry the leather carefully by placing it in a warm room. Once dry, clean it and apply the CWD conditioner.

Be careful! Do not grease a saddle which has not been cleaned first: you risk letting the dirt penetrate into the leather, damaging its appearance and shine.