The SE37 saddle enhances the rider sensations by providing close contact and lightness through its monoflap design and its integrated three-point girthing system. The semi-rigid inclined knee blocks maintain the leg position without blocking it and supports shoulder-hip alignment for optimal stability.
The anatomical design of the wide panels is adapted to the horse morphology and improves the distribution of the pressure along its back. The width of the saddle tree’s arch and the wide gullet ensure freedom of movement of the shoulders and spine, promoting greater amplitude.
Customizable with Mademoiselle colors.
In order to protect the leather, it is essential to initially oil your saddle. At CWD, we carry out this process before delivering your made-to-measure saddle. No additional treatment is needed, and you can use it as soon as you receive it.
Beware of the risk of staining white clothes, especially during the first few uses.
Our accessories are delivered without having been oiled. Apply a large quantity of CWD oil or conditioner evenly and repeat if necessary to obtain the desired suppleness. Use the CWD glove to massage any excess conditioner into the leather. If possible, let the leather absorb the CWD conditioner for 24 hours in a well-ventilated room. Natural leathers will darken before lightening slightly to reach their definitive shade.
Before oiling or greasing your accessories, make sure to try them on your horse first. Accessories which have been greased cannot be returned.
The leathers used in saddle making are living materials and must be regularly cared for. Care treatments should be adapted to use and must take the climate and the season into account.
Here are two key steps to ensure your leathers remain comfortable and beautiful.
1. Clean, after each use using a sponge and CWD liquid glycerine soap to keep the leather supple, pleasant and high-performing.
2. Apply CWD conditioner at least twice a month on all the equipment, using the CWD glove. Don’t forget the stitching.
In summer, after each use, the leather needs to be treated to compensate for and repair the drying out caused by the sun and high temperatures.
In winter, a heated area is needed to combat the ambient humidity, which is damaging to its lifespan and can be a source of mould.
Avoid the following
As far as possible, avoid cleaning your leathers with products which contain solvents which will prematurely discolour the saddle and will dry out the leather fibres.
If your saddle has been in contact with water, dry the leather carefully by placing it in a warm room. Once dry, clean it and apply the CWD conditioner.
Do not grease a saddle which has not been cleaned first: you risk letting the dirt penetrate into the leather, damaging its appearance and shine.